|
WALKER PRODUCTS 93224004
|
|
$99.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$99.79
Total
|
|
|
|
|
|
| WALKER PRODUCTS 93224004 Specifications |
|---|
| Connector Gender | Male | | Mounting Type | Threaded | | Overall Length | 12.91 IN | | Sensor Type | Heated | | Thread Diameter | 18.0 mm | | Wire Gauge Measurement | 20.0 | | Wire Quantity | 4 | | Wiring Harness Length | 9.37 IN | | Wrench Size | 22 |
|
|
| Walker Products began supplying the fuel system needs of the automotive industry in 1946. Today Walker is one of the largest, privately owned manufacturers of fuel system components and engine sensors, and has served the needs of the worldwide automotive aftermarket. They are committed to supplying products manufactured to meet or exceed OEM standards and specifications. This effort is backed by their own manufacturing, product management and engineering staff to ensure it is maintained and accurate in the production of quality parts, vehicle applications, instruction sheets and technical support.
Their products include Carburetor and Fuel Injection Repair Kits, Oxygen Sensors and other Engine Management products such as Throttle Position Sensors, Cam and Crankshaft Sensors, Fuel Injectors, Spark Plug Wires and Gaskets. As an ISO 9001/IATF16949 certified company, they are committed to supplying the highest quality products.
 O2 Sensor Identification Guide An OBD Scan Tool will usually identify Oxygen Sensors by the Bank Number (B1 = Bank 1) and Sensor Number (S1 = Sensor 1). Bank 1 will always contain Cylinder 1, which is located closest to the front of the engine.
Part manufacturers often use different terms than scan tools to identify sensor positions. Regardless of the vehicle's engine orientation, the right or left bank is determined by viewing the engine from the rear (opposite the drive belts).
A Upstream Sensor (Before Converter)
B Downstream Sensor (After Converter)
C Left or Front Upstream Sensor (Before Converter)
D Right or Rear Upstream Sensor (Before Converter)
 Common O2 Sensor Contaminants Oxygen (O2) Sensors commonly fail due to contamination. When checking or replacing an O2 Sensor, visually inspect the sensor body to determine if it has been contaminated by a faulty part or substance upstream, and correct the fault before replacing the sensor.
| ANTIFREEZE POISONING |
Common Causes:
- Cracked or warped cylinder head
- Leaking cylinder head gasket
- Leaking intake manifold gasket
 Antifreeze Poisoned O2 Sensor |
| SILICONE POISONING |
Common Causes:
- Use of an improper silicone gasket sealant on the engine
 Silicone Poisoned O2 Sensor |
| CARBON BUILDUP |
Common Causes:
- Clogged air filter
- Leaking or defective fuel injector
 Carbon Buildup O2 Sensor |
Attention California Customers - WARNING: This product can expose you to chemicals, including Nickel and Nickel Alloyed Stainless Steel, which are known to the State of California to cause cancer or birth defects or other reproductive harm. www.p65warnings.ca.gov
|
WALKER PRODUCTS Warranty Information:90 Days |
|
