Silicone Heat Pad; 4 in. x 5 in.; 250 Watts; 120 Volt; 4" x 5"; 120 Volts; 250 Watts
Keep your engine oil or transmission fluid at an optimum temperature to avoid cold starts in the winter. Just place this heating pad beneath your oil or transmission pan and plug it into a 120V outlet to warm the fluid.
Features & Benefits:
Silicone Covered
Acid Resistant
Pliable
Easy To Install
Silicone Heat Pad Usage Tips
Not for use on batteries.
Do not cut pad.
Always place heater on metal reservoir before plugging in heater.
Application ranges may vary depending on outside temperature.
Do not use pads with higher than recommended wattage for specific capacities:
100 Watts
150 Watts
250 Watts
500 Watts
Engine Oil Pan
2-5 Quarts
5-8 Quarts
8-20 Quarts
20-35 Quarts
Diesel Tank
5-7 Gallons
7-10 Gallons
10-20 Gallons
20-30 Gallons
Hydraulic Tank
1-5 Gallons
5-10 Gallons
10-20 Gallons
20-30 Gallons
Water Tank
0-2 Gallons
2-4 Gallons
4-7 Gallons
7-10 Gallons
Additional Resources
Common Failure & Troubleshooting Tips Attention California Customers - WARNING: This product can expose you to chemicals including lead and lead compounds which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information visit www.p65warnings.ca.gov.
Silicone Heat Pad Usage Tips
Additional Resources