Hi-Carbon Alloy GEOMET Coated Rotor; Dimpled and Slotted
Dynamic Friction High Carbon Alloy Performance Brake Rotors are engineered for maximum performance, reliability, and durability.
Features & Benefits:
GEOMET® coated to provide high-performance corrosion protection
Engineered with High Carbon castings to enhance noise dampening characteristics, while providing strength, stability, durability, and performance
Slots on the rotor removes brake and road debris and prevent pad glazing. The slots will grab more bite to the brake pads giving you shorter stopping distance especially in wet weather
Original Equipment (OE) vane configuration to ensure proper and maximum heat dissipation
Dipped cores to provide for a smoother vane structure
Disc Thickness Variation (DTV) - .010mm maximum
Lateral Runout - .050 mm maximum
100% precision mill-balanced for smoother stopping and zero vibration at any speed
Fined Turned finish (1.6 RMS) for improved initial rotor and pad break-in
Additional Information About DFC High Carbon Alloy Performance Rotors
Installation Tips
Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Attention California Customers - This product contains Antimony Oxide and other chemicals which is known in the State of California to cause cancer ( or reproductive problems).
DYNAMIC FRICTION Warranty Information:12 months/12,000 miles
Installation Tips