|
DANA 10166666
|
|
$2,614.79
Price
|
$0.00
Core
|
+ Sold in packs of 1x1
Pack
|
$2,614.79
Total
|
|
|
|
|
|
|
|
|
For more than a century, the Spicer name has been built on a legacy of success with trusted drivetrain solutions for cars, commercial vehicles, off-highway machines, military vehicles, and those adapted for high-performance applications. Manufactured in Dana facilities around the world, every Spicer part is designed and produced to the same exacting standards as specified by OE manufacturers ensuring that vehicles continue to operate at peak performance levels.
 Installation Tips - Always replace Brake Pads and inspect Calipers and Brake Hoses when installing new rotors
- Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
- After removing the old rotor, clean the hub face with a Wire Brush to remove rust buildup and apply Copper Anti Seize to prevent future buildup. Rust or debris on the hub can cause rotor runout and lead to wheel vibration
- Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
- Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
- Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
- After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
|
DANA Warranty Information:12 Months |
|
