REIN
More Information for REIN PSH0442
Continue Shopping
 
REIN PSH0442  
$63.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$63.79
Total
REIN PSH0442close
<
>
Part image
REIN PSH0442 Specifications
Crush Washers IncludedNot Required
End 1 GenderMale
End 1 TypeFlange
End 2 GenderMale
End 2 Thread Diameter (MM)14.0000
End 2 TypeInverted Flare
Fitting Seals IncludedYes
Heat Shield IncludedNot Required
Hose Burst Pressure PSI8700
Hose Crimp End FinishZinc Alloy
Hose Crimp End MaterialCarbon Steel
Hose Line LiningSBR Rubber
Hose Line Outer MaterialRubber
Hose MaterialNBR/CSM/CPE
Hose Operating Pressure PSI1700
Mounting Brackets IncludedNot Required
Power Steering Fitting IncludedYes
Pressure Switch IncludedNo
Pressure Switch Port IncludedYes
Protective Shield IncludedNo
Protective Sleeve IncludedNot Required
Tubing FinishZinc Alloy
Tubing MaterialCarbon Steel
Features:
  • A direct fit, replacement hose and line assembly
  • SAE J188 compliant high pressure rubber compound hose with internal noise absorber
  • SAE J526 compliant coated, rust resistant heavy duty tubing and end fittings
  • Pre assembled coated, rust resistant hose crimp end(s) and bracket(s), where required
  • Pre attached protective jacket(s) and heat sleeve(s), where required
Installation Tips
  • Replace all power steering hoses at the same time, to prevent system contamination
  • Completely flush the system with an OE approved Power Steering Fluid prior to installation (the correct type of fluid is noted on the reservoir cap or in your owner's manual). Flushing the system is critical to prevent system contamination and failure
  • Install the replacement hose in reverse order of how it was removed, making sure to install any included o-rings. Lubricate the o-rings with Silicone Grease and carefully install them, to prevent damage. Make sure the hose is not touching or rubbing against any components that vibrate or give off heat
  • Consider installing a Power Steering Filter on the Power Steering Return Hose to prevent system contamination and extend the life of the power steering components
OEM / Interchange Numbers: 53713S9VA01

REIN Warranty Information:
24 Months, 24,000 Miles