The aluminum accumulator is assembled using a universal can top which is punched
with the appropriate hole configuration at the point of use. The port and outlet
fittings are welded to the can top. The anti-siphon tube is assembled through
the can into the inlet fitting, then welded in place. The anti-siphon tube is
manufactured in house by cutting the tube to length, assembling the filter,
end forming with the OEM trumpet design, bending, and punching the pickup and
pressure equalization holes. The bottom can is assembled to the top can with
the desiccant bag inside. The two halves are then welded around the outside
of the seam.
After welding is complete the valve cores are assembled in the port fittings
and the unit is checked for leaks. The units are leak tested using a nitrogen
pressure test underwater. Once the accumulators pass leak test, caps are assembled
and each unit individually packed in a cardboard box with o-ring kits.
Attention California Customers - Warning: This product contains a chemical known to the State of California to cause birth defects or other reproductive harm.
Closeout Inventory Warranty Information:Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).Regular Inventory Warranty Information:120 Days
