Brake Pads are sold as a set. Quantity of one (1) is for both wheels
FERODO FDB1897 Specifications
Friction Material Thickness Inner Pad (MM)
20.2
Friction Material Thickness Outer Pad (MM)
20.2
Pad FMSI Number
D1306
Pad Wear Sensor Included
No
Ferodo
Since 1897, Ferodo® has been a global market leader and trusted brand in foreign nameplate braking. It is a leading friction choice of Original Equipment (OE) Manufacturers such as Fiat®, Jaguar, Land Rover and Volkswagen®. Ferodo braking technology and expertise has also been applied to Karting, motorcycle and Formula 1® car racing in Europe. With over 100 years of experience in friction and braking, the Ferodo name is synonymous with excellence.
Features & Benefits:
European R90 compliant
Vehicle-specific friction material formulations deliver ultimate control with minimal stopping distances
Shims and chamfers keep noise levels down while maintaining top performance
Special thermal underlayer ensures outstanding heat dissipation, reducing the possibility of brake fade
Extensive research and laboratory & road testing to achieve OE manufacturer standards
How to Tell if Your OE Brake Pad is Manufactured by Ferodo
Installation Tips
Suspend the caliper from the suspension using a Caliper Hanger to prevent damage to the brake hose
Apply Brake Lube to caliper pins, clips, the edges of the brake pad mounting tabs, and the back side of the brake pads to ensure noise free braking. DO NOT apply lube to the friction side of the brake pads
Use a Caliper Piston Compressor to retract the caliper piston(s) and make room for the new, thicker brake pads
Open the master cylinder reservoir during piston compression to prevent pressure buildup. Keep an eye on the Brake Fluid level to ensure it does not overflow
After the job is complete, pump the brake pedal several times to push the caliper piston back up against the pads to ensure proper brake function
Installation Tips