MOTORAD
More Information for MOTORAD 1087180
{Alternate Inventory Numbers: 1087-180}
Continue Shopping
 
MOTORAD 1087180  
$43.79
Price
$0.00
Core
+ Sold in packs of 1x1
Pack
$43.79
Total
Choose
MOTORAD 1087180close
<
>
Part image
MOTORAD 1087180 Specifications
Bleeder HoleYes
ColorSilver
Gasket or Seal IncludedYes
Gasket/Seal MaterialRubber
Grade TypeRegular
Hardware IncludedNo
Height3.70 in
Inside Diameter (IN)1.54
Installation Tool IncludedNo
Jiggle Pin IncludedYes
MaterialPlastic, Aluminum, Stainless Steel, Copper
Mounting Hardware IncludedNo
Mounting Hole Quantity2
Number of Bolt Holes2
Number Of Outlet Ports2
Number of Seals1
Outlet Diameter0.79 in, 1.54 in
Outlet Port Quantity2
Seal TypeRubber
Start to Open Temperature180 Deg. F
180 Degree; Assembly; Integrated Housing Thermostat; Includes Thermostat, Housing, and Seal

Manufactured with OEM quality materials and safety standards by an OE Supplier. Stands up to even the most demanding automotive cooling systems. Manufactured with OEM specifications and processes. Copper case and wax compound assures rapid response to temperature changes in the coolant.

Which Thermostat Is Right For You?

Type Lifespan Flow Rate Precise Temperature Control Fail-Safe Engine Protection
Economy
Standard Replacement
★★ ★★
Performance
★★ ★★ ★★
Heavy Duty ★★★ ★★ ★★★
Premium
★★ ★★
What Temperature Thermostat Do I Need?

Thermostats have a “rated” temperature (such as 180F or 195F). This is the temperature the thermostat will start to open, releasing heated coolant from the engine into the radiator. The thermostat will fully open once the coolant gets another ten or fifteen degrees warmer.

OE TEMPERATURE

These thermostats match the OEM-specified temperature rating for the vehicle. Manufacturers recommend an OE temperature thermostat for most engines, especially for:

  • Modern engines with computers that use the coolant temperature to help control the fuel, emissions and other important systems

ALTERNATE TEMPERATURE

These thermostats have a temperature rating below (cooler than) the OEM-specified temperature rating for the vehicle. This option may make sense for use in:

  • Modified Engines
  • Performance Applications
  • Older / Classic Vehicles
Cooling System Maintenance | Tips & Tools

Without regular maintenance, cooling system components will degrade and fail prematurely, which can lead to costly engine damage. Protect your engine with simple preventative maintenance:

  • Completely drain and flush the system using Cooling System Flush prior to installation. Flushing the system is critical to prevent system contamination and failure.
  • Consider replacing the Radiator Hoses (and Hose Clamps) and Radiator Cap as part of routine preventative maintenance. System contamination can cause these parts to degrade and fail over time, which can lead to severe engine damage from overheating.
  • Refill radiator with fresh Coolant / Antifreeze according to the volume and formula specified in your Owner's Manual. Inspect levels and condition every year.
Videos

Cooling System Overview

Installing an Automotive Thermostat


Attention California Customers - WARNING: Cancer and Reproductive Harm - www.P65Warnings.ca.gov

OEM / Interchange Numbers: 68320858AA

Closeout Inventory Warranty Information:
Wholesaler Closeout items have a 30 day warranty (but still are covered by our Return Policy).

MOTORAD Regular Inventory Warranty Information:
12 Months